TOUCHMATE TM-MID793 FLASH FILE MT6572 4.4.2 FIRMWARE ROM
DOWNLOAD ->>> https://blltly.com/2tyXXY
How to Flash TOUCHMATE TM-MID793 Tablet with MT6572 Firmware
If you have a TOUCHMATE TM-MID793 tablet that is stuck on the logo screen, bricked, or has software issues, you may need to flash it with a new firmware. Flashing is the process of installing a new operating system on your device. In this article, we will show you how to flash your TOUCHMATE TM-MID793 tablet with MT6572 firmware using a tool called SP Flash Tool.
Before you proceed, make sure you have the following:
A computer running Windows XP or above.
A USB cable to connect your tablet to your computer.
A backup of your important data, as flashing will erase everything on your tablet.
A fully charged battery on your tablet.
The MT6572 firmware file for your TOUCHMATE TM-MID793 tablet. You can download it from here or here.
The SP Flash Tool software. You can download it from here.
The USB drivers for your tablet. You can download them from here.
Once you have everything ready, follow these steps to flash your tablet:
Extract the firmware file and the SP Flash Tool software to separate folders on your computer.
Install the USB drivers on your computer.
Run the SP Flash Tool.exe file from the extracted folder.
Click on the Scatter-loading button and browse to the firmware folder. Select the MT6572_Android_scatter.txt file and click Open.
Make sure all the boxes are checked and the files are loaded correctly.
Click on the Download button at the top.
Turn off your tablet and remove the battery if possible.
Connect your tablet to your computer via USB cable while holding the Volume Down button.
The SP Flash Tool will detect your device and start flashing. Wait until you see a green circle with a check mark indicating that the flashing is done.
Disconnect your tablet and put back the battery if you removed it.
Turn on your tablet and enjoy the new firmware.
Congratulations! You have successfully flashed your TOUCHMATE TM-MID793 tablet with MT6572 firmware. If you encounter any problems during or after the flashing process, feel free to leave a comment below or contact us for assistance.
What is MT6572 firmware?
MT6572 firmware is a type of software that runs on devices powered by MediaTek MT6572 chipset. MediaTek is a Taiwanese company that produces chips for smartphones, tablets, and other devices. MT6572 is a dual-core processor that supports Android 4.4.2 KitKat operating system. MT6572 firmware contains the system files, boot files, recovery files, and other components that make your device function properly.
Why do you need to flash MT6572 firmware?
There are several reasons why you may need to flash MT6572 firmware on your device. Some of them are:
Your device is stuck on the logo screen or boot loop and cannot start normally.
Your device is infected by malware or viruses that cause performance issues or unwanted pop-ups.
Your device has corrupted system files or partitions that prevent it from working properly.
Your device has outdated or incompatible firmware that causes bugs or errors.
You want to upgrade or downgrade your device's firmware to a different version.
You want to root your device or install a custom ROM that requires flashing a new firmware.
What are the risks of flashing MT6572 firmware?
Flashing MT6572 firmware is not a difficult process, but it does involve some risks. Some of them are:
You may lose your warranty if you flash an unofficial or modified firmware on your device.
You may lose your data if you do not backup your device before flashing.
You may brick your device if you flash a wrong or corrupted firmware on your device.
You may damage your device if you interrupt the flashing process or use a faulty USB cable or port.
Therefore, it is important to follow the instructions carefully and use the correct firmware and tools for your device. If you are not sure about what you are doing, it is better to seek professional help or avoid flashing altogether. 061ffe29dd